Clovis, California

I want to introduct something about HG Rolling Scratch Board Drier. Description The operation principle of HG series cylinder type drying machine is to let that the materials in liquid or thick liquid state form the thin film on the surface of the cylinder heated through steam or other thermal carrier. For one turn of the cylinder, the film will complete the drying and the product will be removed through the scraper. The exposed surface of the cylinder will contact the materials again to form the film and carry out the drying. Application HG series cylinder type drying machine is widely used for the drying, tablet making and other operation procedures of the sticky and paste state materials. The machine has been used in the food, chemical, medicine and other industries with good performances. Features Taking the steam or oil as the heat source. The heated area is big. The heat efficiency is high. Heating is uniform. The drying speed and rate is big. The heat transmission for the wet materials on the cylinder wall is from the inside to the outside and
Clovis, California
Location in Fresno County and the state of California
Coordinates: 3649?10?N 11941?41?W? / ?36.81944 119.69472? / 36.81944; -119.69472
Country
United States
State
California
County
Fresno
Government
-Mayor
Kayla Swartzel
-Mayor Pro Tem
Kevin Kline
-Senate
Dave Cogdill (R)
-Assembly
Michael Villines (R)
-U. S. Congress
Devin Nunes (R)
Area
-Total
23.03sqmi(37.07km2)
-Land
23.03sqmi(37.07km2)
- Water
0sqmi(0km2)
Elevation
361ft (110m)
Population (2008)
-Total
94,278
-Density
4,004/sqmi(1,545.6/km2)
Time zone
PST (UTC-8)
-Summer(DST)
PDT (UTC-7)
ZIP codes
93611-93613 & 93619
Area code(s)
559
FIPS code
06-14218
GNIS feature ID
1656303
Website
http://www.ci.clovis.ca.us

Pollasky Avenue, Old Town Clovis
Clovis is a city in Fresno County, California, United States, northeast of Fresno. As of 2007, the population was 92,269.
Contents
1 History
2 Geography
3 Demographics
4 Clovis Unified School District
5 See also
6 References
7 External links
//
History
The city of Clovis began as a freight stop along the San Joaquin Valley Railroad. Organized on January 15, 1890 by Fresno businessmen Thomas E. Hughes, Fulton Berry, Gilbert R. Osmun, H.D. Colson, John D. Gray, and William M. Williams, in partnership with Michigan railroad speculator Marcus Pollasky, the SJVRR began construction in Fresno on July 4, 1891 and reached the farmlands of Clovis Cole and George Owens by October of that year. The railroad purchased right-of-way from both farmers, half from each - the east side from Cole and the west side from Owens - and ran tracks up the borderline between the two properties. The railroad agreed to establish a station on the west side of the tracks and to call it "Clovis". The Clovis station, after which the town was named, was on the Owens side of the track.
Cole and Owens later sold land to the person of Marcus Pollasky for development of a townsite. Fresno civil engineer Ingvar Tielman mapped the townsite on behalf of Marcus Pollasky and recorded the townsite map on December 29, 1891. The original townsite featured streets named for the officers and principal investors of the railroad (Benjamin)Woodworth, (Marcus)Pollasky, Fulton (Berry), (Thomas) Hughes, (Gerald)Osmun, and (O. D.) Baron. The townsite, named Clovis by its owner Marcus Pollasky, was laid out on what was originally Owens' land.
The railroad was completed as far as the town of Hamptonville (now Friant) on the banks of the San Joaquin River, just 26miles (42km) from its point of origin in Fresno. Following a celebration of the completion of tracklaying in November, 1891, the railroad began official operation in January 1892.
The first year of operation of the railroad coincided with the beginnings of a deep national economic decline. Farmers were unable to get profitable return on their crops, banks and railroads failed nationwide. The SJVRR was unable to generate sufficient revenues to pay its debt, was leased to the Southern Pacific Railroad and subsequently bought by SPRR in 1893. The completion in 1894 of the lumber flume from the Shaver Lake mills to a yard in Clovis adjacent to the SJVRR track provided the impetus for further development of the area around the Clovis Station and the town began to take shape as lumber yard employees build homes close to their employment. Service businesses, churches, and schools became necessary, and the town was begun.
At the same time as the railroad was being constructed, a group of Michigan lumbermen began acquiring thousands of acres of timber in the Sierra Nevada Mountains east of Clovis. They built a dam on Stevenson Creek and created a lake that would enable them to move freshly cut lumber to a mill located next to the lake. They then constructed a 42-mile (68km), 25-foot (7.6m) high, V-shaped flume that started at the foot of the dam. As lumber was rough cut at the mill, it was loaded into the flume and propelled by water to a planing mill in the new town of Clovis.
Fresno newspapers in 1896 described Clovis as a growing town of nearly 500 homes and businesses. Clovis was incorporated as a city in 1912. Principal streets in the town center are still named for the railroad's officers, except for Fulton Street, which was later named Front Street, then Main Street, and is now Clovis Avenue.
The last surviving structure built by the railroad is a depot now located near the site of the original Clovis Station. It has been long believed that this depot originally stood on the Tarpey Ranch near the intersection of Ashlan and Clovis Avenues. Evidence has surfaced that the depot...(and so on) To get More information , you can visit some products about led movingmassage board, rustic teak wood, . The HG Rolling Scratch Board Drier products should be show more here!